Auto Lift Power Units
Auto lift power units provide the electrical component required for raising and lowering vehicles on 2 post and 4 post automotive lifts.
Allpart branded, value-added power units are ETL tested and certified, so you know you can trust them to power your lifts safely and efficiently. Each unit operates with a high performance pressure balanced pump for fast lift speeds.
Allpart also carries a complete inventory of replacement parts for our branded power units so you can service and repair your power units to keep your lifts operating smoothly.
Key Features of Allpart Branded Power Units
ALPS-PU-001 and ALPS-PU-002
- High torque electric motor
- ETL tested and certified
- 2 and 4 post lift power units
- Works on lifts up to 12K lb capacity
- Fully pressure balanced for high volumetric and mechanical efficiency
- Push button start for raising the lift
- Manually controlled lowering speed
- Low leakage poppet design
- 4.0 gallon US vertical tank
- Relief fixed at 2750 PSI
- Fixed relief valve for constant, even pressure throughout hydraulic system
- Cartridge style, manual release and check, valves for easy service and interchangeability
- ALPS-PU-002 comes equipped with a height limiting “kill” switch
SPX Auto Lift Power Units
AC-10AH – AB1270 – AB1396
- ETL-tested
- ALI-approved
- 2 and 4 post auto lift power units
- Works on lifts up to 12K lb capacity
- Manually-controlled lowering speed
- Push button start for raising the lift
- Fixed relief valve for constant, even pressure throughout hydraulic system
- Cartridge-style manual release and check, valves for easy service and interchangeability
- AB1270 comes equipped with a height-limiting “kill” switch
Auto Lift Power Unit Safety Guide
It is important to know when to replace power units for a lift to operate safely. If you are experiencing any of the following conditions, we recommend immediate replacement.
- Power unit will not pump; unit runs, but does not raise
- Power unit lowers on its own; sign of internal leaking
- Power unit shows any visual signs of leaking
- Power surge causes breaker to trip or fuse to blow
- Power unit is smoking or making unusual noises
Maintaining safety in your shop is critical for your team and your clients, as well as the vehicles you service. Below are our recommended safety precautions related to power units:
- Never leave a load on the power unit. It is not a holding device
- Do not overload garage lifts
- Always use locks
- Lower the lift slowly under heavy loads
- Maintain proper fluid levels and be sure the oil reservoir is not overfilled
- Do not use a power unit with faulty wiring
Allpart Supply has a wide range of auto lift power units and replacement parts to keep your lifts safely operating at full capacity.
Let Us Help
For any information or assistance relative to Allpart lift power units, let our highly qualified and experienced staff help you find the right unit for your automotive lift.