Hydraulics Catalog Features Power Units, Fittings, Hoses, Cylinders, and Seal Kits
Hydraulics Catalog featuring Automotive Lift Power Units, Hydraulic Seals, Hydraulic Cylinders, and Hydraulic Hoses and Fittings.
Hydraulics Catalog PDF
Allpart Branded Power Units
| ALLPART | Description | SPX |
| ALPS-PU-001 | Allpart Power Unit Single Phase, 4 Gallon | AC10AH |
| ALPS-PU-002 | Allpart Power Unit Single Phase, 4 Gallon with lead | AB1270 |
| ALPS-PU-003 | Allpart Power Unit Single Phase, 6 Gallon | AB1271 |
| ALPS-PU-004 | Allpart Power Unit 3 Phase, 4 Gallon | AD1324 |
| ALPS-PU-005 | Allpart Plug In Power Unit, 120V, 4 Gallon | AB1396 |
Features and Benefits – Allpart Branded Power Units
ALPS-PU-001 and ALPS-PU-002
- High torque electric motor
- Allpart Branded Value Added Power Units
- ETL tested and certified
- 2 and 4 Post Lift Power Unit
- Works on Lifts up to 12K lb capacity
- High performance, pressure balanced pump for fast lift speeds
- Fully pressure balanced for high volumetric and mechanical efficiency
- Raises and Lowers the Lift
- Manually controlled lowering speed
- Push button start for raising the lift
- Low leakage poppet design
- 4.0 Gallon US Vertical Tank
- Relief fixed at 2750 PSI
- Cartridge style check valve
- Cartridge release valve
- Fixed relief valve for constant, even pressure throughout hydraulic system
- Cartridge style, manual release and check, valves for easy service and interchangeability
- ALPS-PU-002 comes equipped with height limiting “kill” switch.
- In addition to complete power units, Allpart Supply carries a complete inventory of replacement parts for Allpart Branded power units.
| ITEM NO. | PART NO. DESCRIPTION | |
| 1 | FE-5141-AC | RESERVOIR |
| 2 | FE-RV-18 | FIXED RELIEF VALVE |
| 3 (NOT SHOWN) | FE-1118-AA | PUMP/MOTOR SPLINE COUPLING |
| 4 | FE-260185 | RESERVOIR BREATHER |
| 5 | FE-2507-AA | CHECK VALVE |
| 6 | FE-2565-AA | RELEASE HANDLE ASSY. |
| 7 | FE-G1-1073-48 | RESERVOIR O’RING |
| 8 | FE-VF-9021 | RELEASE VALVE CARTRIDGE |
| 9 | FE-4610-AA | START SWITCH BEZEL ASSY |
| 10 | FE-4612-AA | RUBBER BOOT FOR SWITCH |
| 11 | FE-4611-AA | MOMENTARY SWITCH CONTACT |
| 12 | FE-1611-AA | SUCTION STRAINER |
Click Photo for Large Image
| ITEM NO. | PART NO. DESCRIPTION | |
| 1 | FE-5141-AC | RESERVOIR |
| 2 | FE-RV-18 | FIXED RELIEF VALVE |
| 3 (NOT SHOWN) | FE-1118-AA | PUMP/MOTOR SPLINE COUPLING |
| 4 | FE-260185 | RESERVOIR BREATHER |
| 5 | FE-2507-AA | CHECK VALVE |
| 6 | FE-2565-AA | RELEASE HANDLE ASSY. |
| 7 | FE-G1-1073-48 | RESERVOIR O’RING |
| 8 | FE-VF-9021 | RELEASE VALVE CARTRIDGE |
| 9 | FE-4610-AA | START SWITCH BEZEL ASSY |
| 10 | FE-4612-AA | RUBBER BOOT FOR SWITCH |
| 11 | FE-4611-AA | MOMENTARY SWITCH CONTACT |
| 12 | FE-1611-AA | SUCTION STRAINER |
| 13 | FE-4043-AA | KILL SWITCH BODY ASSY |
| 14 | FE-4193-AA | KILL SWITCH MOMENTARY CONTACT |
Click Photo for Large Image
| ITEM NO. | PART NO. DESCRIPTION | |
| 1 | FE-R1-6000-11 | RESERVOIR |
| 2 | FE-RV-17 | FIXED RELIEF VALVE |
| 3 (NOT SHOWN) | FE-1118-AA | PUMP/MOTOR SPLINE COUPLING |
| 4 | FE-1683-AB | RESERVOIR BREATHER |
| 5 | FE-2507-AA | CHECK VALVE |
| 6 | FE-2565-AA | RELEASE HANDLE ASSY. |
| 7 | FE-G1-1073-48 | RESERVOIR O’RING |
| 8 | FE-VF-9021 | RELEASE VALVE CARTRIDGE |
| 9 | FE-4610-AA | START SWITCH BEZEL ASSY |
| 10 | FE-4612-AA | RUBBER BOOT FOR SWITCH |
| 11 | FE-4611-AA | MOMENTARY SWITCH CONTACT |
| 12 | FE-1611-AA | SUCTION STRAINER |
Click Photo for Large Image
F2404
FO-MP STRAIGHT
F2501
FO-MP 90º
F2502
FO-FP 90º
F6400-O
FO-MORB STRAIGHT
F6600
FO-FO-FJS TEE
F6602
FO-FJS-FO TEE
F6801-NWO
FO-MAORB 90º
F6803-NWO
FO-FO-MAORB TEE
2403
MJ-MJ STRAIGHT
2701
MJ-MJ BULKHEAD 90º
2703
MJ-MJ-MJ BULKHEAD BRANCH TEE
5404
MP-MP HEX NIPPLE
5500
MP-MP 90º
5504
FP-FP 90º STREET ELBOW
6500
MJ-FJS 90º
6502
MJ-FJS 45º
FEMALE JIC STRAIGHT
FEMALE JIC 45º
FEMALE JIC 90º
MALE PIPE SWIVEL STRAIGHT
| HOSE SIZE | JIC STRAIGHT | JIC 45 | JIC 90 | PIPE STRAIGHT | ||||||||||
| 1/4”
3/8” 1/2” |
04G-04FJX
06G-06FJX 08G-08FJX |
04G-04FJX45
06G-06FJX45 08G-08FJX45 |
04G-04FJX90
06G-06FJX90 08G-08FJX90 |
O4G-04MPX
06G-06MPX 08G-08MPX |
||||||||||
Two Post Lift
| 7,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-000 2.5” BORE X 36” STROKE |
AM-25001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-25001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-25001500CAN | READY MACHINE 1.50“ SHAFT | |
| AM-25001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-25001500THI | TEXAS HYDRAULICS | |
| AM-25001500KER | IMPORT | |
| 9,000 to 12,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001 3” BORE X 36” STROKE |
AM-30001750AA | ARLINGTON AUTO 1.75” SHAFT |
| AM-30001500AA | ARLINGTON AUTO 1.50” SHAFT | |
| AM-30001500CAN | READY MACHINE 1.50“ SHAFT | |
| AM-30001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-30001500THI | TEXAS HYDRAULICS | |
| AM-30001750KER | IMPORT | |
| 15,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-005 3-1/2” BORE X 36” STROKE |
AM-35001750CAN | READY MACHINE 1.75” SHAFT |
Four Post Lift
| 12,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-003 3-1/2” BORE X 72” STROKE |
AM-35001500AA | ARLINGTON AUTOMATICS |
| AM-35001500THI | TEXAS HYDRAULICS | |
| AM-35001500CAN | READY MACHINE | |
| AM-35001500DK | DAKOTA | |
| 18,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-006 4” BORE X 72” STROKE |
AM-40001500CAN | READY MACHINE |
| AM-40001500DK | DAKOTA | |
| 25,000 to 30,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-008 5” BORE X 60” STROKE |
AM-50001500AA | ARLINGTON AUTOMATICS |
| AM-50001500THI | TEXAS HYDRAULICS | |
| AM-50001500CAN | READY MACHINE | |
| AM-50001500DK | DAKOTA | |
| 40,000 to 60,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| AM-632 6” BORE X 32” STROKE |
AM-60003000CAN | READY MACHINE |
| 70,000 to 80,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| AM-732 7” BORE X 32” STROKE |
AM-70003000CAN | READY MACHINE |
Two Post Lift
| AO MECHANICAL, AF MECHANICAL, & AL-7 | ||
| CYLINDER | SEALS | NOTES |
| BP-82803 | BP-82860 | HOLMAC (ALLEN) |
| BP-83339 | MF-PACOMA (HEX) FJ783-12MF | |
| LAS7, LASO7, & LM07 | ||
| CYLINDER | SEALS | NOTES |
| BP-81821 | BP-81821SK | (UNIVERSAL) |
| LMP7, LSP7 | ||
| CYLINDER | SEALS | NOTES |
| BP-81821 | BP-80748 | Serial # < 41833 Fits Cyl #80674 |
| BP-81821SK | Serial # > 41833 (UNIVERSAL) | |
| LAS9, LASO9, LMO9, LMP9 | ||
| CYLINDER | SEALS | NOTES |
| BP-81921 | BP-81921SK | UNIVERSAL KIT |
| LMP7, LSP7 | ||
| CYLINDER | SEALS | NOTES |
| BP-81921 | BP-80813 | Serial # < 41937 Fits Cyl #80800 |
| BP-81921SK | Serial # > 41937 (UNIVERSAL) | |
| NDL5500, NDL7000 | ||
| CYLINDER | SEALS | NOTES |
| BP-83542 83339 | BP-83657 | HOLMAC (ALLEN) |
| BP-83339 | MF-PACOMA (HEX) | |
| NDF7, NDO7, NDF9, NDO9 | ||
| CYLINDER | SEALS | NOTES |
| BP-83542 | BP-83657 | HOLMAC (ALLEN) |
| BP-83339 | MF-PACOMA (HEX) | |
| LFS 9, LFSO 9 | ||
| CYLINDER | SEALS | NOTES |
| BP-82080 PUMP SIDE |
BP-81798 | CESSNA CYL |
| BP-82081 OFF SIDE |
BP-81799 | CESSNA CYL |
| 9000A, 9000F, 9000S | ||
| CYLINDER | SEALS | NOTES |
| BP-91454 | BP-91454SK | CHAIN OVER |
| 12000S | ||
| CYLINDER | SEALS | NOTES |
| BP-91474 | BP-91457SK | INVERTED CYL |
| 9000AI, 9000SI, 12000SI | ||
| CYLINDER | SEALS | NOTES |
| BP-91586 | BP-91586SK | INVERTED CYL |
| RO-FJ783-12MF | ||
| 9000FC MAGNUM | ||
| CYLINDER | SEALS | NOTES |
| BP-91732 | BP-91732SK | CHAIN OVER |
Four Post Lift
| LMT9, SST9 & 12, LMA9 & 12, FAR9 &12 | ||
| CYLINDER | SEALS | NOTES |
| BP-80078 | BP-80078SK | UNIVERSAL |
| LMT12 | ||
| CYLINDER | SEALS | NOTES |
| BP-80078 | BP-80141 | SERIAL # < 22316 |
| BP-80078SK | UNIVERSAL | |
| 12000AL, 12000AS, | 12000-4ML, 12000MR | ||
| CYLINDER | SEALS | NOTES | |
| BP-91132 | BP-91132SK | UNIVERSAL | |
| LTC 9 | ||
| CYLINDER | SEALS | NOTES |
| BP-81299 | BP-81299SK | UNIVERSAL |
| QLR-2000 | ||
| CYLINDER | SEALS | NOTES |
| BP-81311 | BP-81311SK | UNIVERSAL |
| LMT22 | ||
| CYLINDER | SEALS | NOTES |
| BP-80410 | BP-81915 | PRINCE |
| BP-80455 | LANTEX | |
| LMT30 | ||
| CYLINDER | SEALS | NOTES |
| BP-80817 | BP-82123 | PRINCE |
| 25000-4, 25000-4W, 30000-4, 30000-4W | ||
| CYLINDER | SEALS | NOTES |
| BP-91197 | BP-91197SK | UNIVERSAL |
Two Post Lift
| 15000, 15002, 18000, 18002 | ||
| CYLINDER | SEALS | NOTES |
| CH-15005 CH-15075 2.5″ BORE x 69″ STROKE |
CH-11191 | MF-PACOMA |
| CL10, CL9, OE-10 | ||
| CYLINDER | SEALS | NOTES |
| CH-16138 2″ BORE x 68″ STROKE |
CH-11014 CH-11400 |
MF-PACOMA Yanti Fast |
| 39000S | ||
| CYLINDER | SEALS | NOTES |
| CH-36135 2″ BORE x 65″ STROKE |
CH-11014 CH-11400 |
MF-PACOMA |
| 12000, 36000, 37000, 39000, 70000, 71000 | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL 36115 2″ BORE x 72″ STROKE REPLACEMENT CH-39097 2″ BORE x 72″ STROKE |
NEW 11400 CH-11014 | MF-PACOMA |
| CH-11019 | HOLMAC | |
| CH-11018 | ARLINGTON AUTOMATICS | |
| 20000, 21000, 26000, 27000, 28000, 30000, 31000, 33000, 35000 |
||
| CYLINDER | SEALS | NOTES |
| ORIGINAL 200001 2.5″ BORE x 36.5″ STROKEREPLACEMENT CH-31265 2.5″ BORE x 36.5″ STROKE |
CH-11013 | HOLMAC |
| CH-11012 | ARLINGTON AUTOMATICS | |
| CH-11037 | BRUNING | |
| CH-11038 | LANTEX | |
| CH-11062 | MF-PACOMA | |
| CH-11075 | MARION – 3” X 36.5” STROKE | |
Four Post Lift
| 12K CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| 44000 SERIES (made by HOLMAC) | ||
| CH-591-50-1620 3-1/2” BORE X 72” STROKEREPLACEMENT EA-021-003H |
CH-591-50-1364 | HOLMAC |
| 24012 SERIES (made by AMERICAN LIFT) | ||
| EA-021-003 3-1/2” BORE X 72” STROKE |
AM-35001500AA | ARLINGTON AUTOMATICS |
| AM-35001500THI | TEXAS HYDRAULICS | |
| AM-35001500CAN | READY MACHINE | |
| AM-35001500DK | DAKOTA | |
| made by BEN PERSON | ||
| BP-80078 3-1/2” BORE X 72” STROKE |
BP-80078SK | UNIVERSAL |
| 24018 (AR, ARXL, LR, XL) | ||
| CYLINDER | SEALS | NOTES |
| EA-021-006 4″ BORE x 72″ STROKE |
AM-40001500CAN | READY MACHINE |
| AM-40001500DK | DAKOTA | |
| 24025 SERIES and 24030 SERIES | ||
| CYLINDER | SEALS | NOTES |
| EA-021-0085″ BORE x 60″ STROKE |
AM-50001500AA | ARLINGTON AUTOMATICS |
| AM-50001500THI | TEXAS HYDRAULICS | |
| AM-50001500CAN | READY MACHINE | |
| AM-50001500CAN | DAKOTA |
| 24050 SERIES and 24060 SERIES | ||
| CYLINDER | SEALS | NOTES |
| AM-632 6″BORE x 32″ STROKE |
AM-60003000CAN | READY MACHINE |
| 24080 SERIES | ||
| CYLINDER | SEALS | NOTES |
| AM-732 7″ BORE x 32″ STROKE |
AM-70003000CAN | READY MACHINE |
| 40000 SERIES, 40E, 40N, 40S – CABLE LIFT | ||
| CYLINDER | SEALS | NOTES |
| CH-40080 3.25″ BORE x 60″ STROKE |
CH-501-59-1821 | HOLMAC |
| CH-44011 3.25″ BORE x 72″ STROKE |
44011SK | MF-PACOMA |
| 44 (EAX, EFX, XAX, XFX, XRX) – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| CH-44011 2.5″ BORE x 69″ STROKE |
CH-44011SK | |
Two Post Lift
| 7,000 TO 9,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-000
2.5” BORE X 36” |
AM-25001500AA | ARLINGTON AUTO 1.5” SHAFT |
| AM-25001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-25001500CAN | READY MACHINE 1.5“ SHAFT | |
| AM-25001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-25001500KEROS | IMPORT OLD STYLE | |
| AM-25001500KER | IMPORT NEW STYLE | |
| 10,000 TO 15,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001
3” BORE X 36” |
AM-30001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-30001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-30001500CAN | READY MACHINE 1.50” SHAFT | |
| AM-30001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-30001750KEROS | IMPORT OLD STYLE | |
| AM-30001750KER | IMPORT NEW STYLE | |
Four Post Lift
| SS-LIFTS – 7,000 TO 9,000 LBS CAPACITY- CABLE STYLE |
||
| CYLINDER | SEALS | NOTES |
| EA-021-002 3” BORE X 70” STROKE |
GE-3070 | READY MACHINE – SCREW-IN GLAND |
| EA-3070 | IMPORT – SQUARE WIRE RETAINER RING | |
| XLT-LIFTS – 7,000 TO 9,000 LBS CAPACITY CABLE STYLE |
| CYLINDER | SEALS | NOTES |
| EA-021-007 3” BORE X 80” STROKE |
GE-3080 | READY MACHINE – SCREW-IN GLAND |
| EA-3080 | IMPORT – SQUARE WIRE RETAINER RING |
| 12,000 TO 15,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-003
3.5” BORE X 72” |
AM-35001500AA | ARLINGTON AUTOMATICS |
| AM-35001500CAN | READY MACHINE | |
| AM-35001500KER | IMPORT | |
| 25,000 TO 27,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-004 5.5” BORE X 60” STROKE – OR – FO-992304 5” BORE X 60” STROKE |
GE-55001750CAN | READY MACHINE – 5.5” BORE |
| GE-55001750KER | IMPORT – 5.5” BORE | |
| AM-50001500AA | ARLINGTON AUTO – 5” BORE | |
| AM-50001500CAN | READY MACHINE – 5” BORE | |
Two Post Lift
| 7000, 8000A, 9000, 9000B, 9100, 9200AR | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL CYL. FO-992301 REPLACEMENT CYLINDER EA021-000 |
FO-991192 | WALTCO |
| FO-991193 | TMS | |
| FO-991284 | PRINCE | |
| FO-991305 | HOLMAC | |
| FO-991512 | TEXAS HYDRAULICS | |
| FO-992301 | ARLINGTON AUTOMATICS | |
| 7000A, 9000A, ALL DP 9 and 10 Series | ||
| CYLINDER | SEALS | NOTES |
| FO-992317 2.5” BORE X 67.5” STROKE |
FO-991281 | PRINCE 2” X 67.5” |
| FO991510 | TEXAS HYDRAULICS | |
| FO-992317 | ARLINGTON AUTOMATICS | |
| DPO12 SERIES, DPO15 Series | ||
| CYLINDER | SEALS | NOTES |
| FO-992322 BORE X 68” STROKE |
FO-P000709 PRINCE3” |
|
| FO-991511 | TEXAS HYDRAULICS | |
| 2 POST NOTE: |
– 12000 with SINGLE CYLINDER | |
| SEE INFORMATION FOR 12K 4 POST CYLINDERS BELOW | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL CYL. FO-992302 3.5” BORE X 72” STROKE |
| REPLACEMENT CYLINDER EA-021-003 |
FO-991194 | WALTCO |
| FO-991195 | TMS | |
| FO-991282 | PRINCE | |
| FO-991306 | HOLMAC | |
| AM-35001500THI | TEXAS HYDRAULICS | |
| AM-35001500AA | ARLINGTON AUTOMATICS |
Four Post Lift
| 12000 Series (AR, LR, EL, LIMO) | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL CYL. FO-992302 |
FO-991194 | WALTCO |
| REPLACEMENT CYLINDER EA-021-003 |
FO-991194 | WALTCO |
| FO-991195 | TMS | |
| FO-991282 | PRINCE | |
| FO-991306 | HOLMAC | |
| AM-35001500THI | TEXAS HYDRAULIC | |
| AM-35001500AA | ARLINGTON AUTOMATICS |
| 18000, 27000, 40000, and 50000 Series | ||
| CYLINDER | SEALS | NOTES |
| FO-992304 | FO-991283 | PRINCE |
| FO-991307 | HOLMAC | |
| FO-991308 | WALTCO | |
| FO-991309 | TMS | |
| AM-50001500THI | TEXAS HYDRAULIC | |
| AM-50001500AA | ARLINGTON AUTOMATICS | |
| 60000 Series | ||
| CYLINDER | SEALS | NOTES |
| FO-992326 | FO-992326SK | 6“ BORE X 60” STROKE |
Two Post Lift
| 7,000 TO 9,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-000
2.5” BORE X 36” |
AM-25001500CAN | READY MACHINE – 1.50” SHAFT |
| AM-25001750CAN | READY MACHINE – 1.75” SHAFT | |
| AM-25001500KER | IMPORT | |
| 10,000 TO 15,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001
3” BORE X 36” |
AM-30001500CAN | READY MACHINE 1.50” SHAFT |
| AM-30001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-30001750KER | IMPORT | |
Four Post Lift
| SS-LIFTS – 7,000 TO 9,000 LBS CAPACITY- CABLE STYLE |
||
| CYLINDER | SEALS | NOTES |
| EA-021-002 3” BORE X 70” STROKE |
GE-3070SK | READY MACHINE – SCREW-IN GLAND |
| EA-3070 | IMPORT – SQUARE WIRE RETAINER RING | |
| XLT-LIFTS – 7,000 TO 9,000 LBS CAPACITY – CABLE STYLE |
||
| CYLINDER | SEALS | NOTES |
| EA-021-007 3” BORE X 80” STROKE |
GE-3080 | READY MACHINE – SCREW-IN GLAND |
| EA-3080 | IMPORT – SQUARE WIRE RETAINER RING | |
| 12,000 TO 15,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-003 3.5” BORE X72″ STROKE |
AM-35001500CAN | READY MACHINE 1.5” |
| AM-35001500KER | IMPORT | |
| 25,000 TO 27,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-004 BORE X 60” STROKE – OR – FO-992304 5” BORE X 60’ STROKE |
GE-55001750CAN READY MACHINE 5.5” |
|
| GE-55001750KER | IMPORT | |
| AM-50001500CAN | READY MACHINE | |
Two Post Lift
| 7,000 TO 9,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-000
2.5” BORE X 36” |
AM-25001500AA | ARLINGTON AUTO 1.5” SHAFT |
| AM-25001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-25001500THI | TEXAS HYDRAULICS | |
| 10,000 TO 15,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001 3” BORE X 36” STROKE |
AM-30001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-30001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-30001500THI | TEXAS HYDRAULIC | |
Four Post Lift
| 12,000 TO 15,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-003 3.5” BORE X 72” STROKE |
AM-35001500AA | ARLINGTON AUTOMATICS |
| AM-35001500THI | TEXAS HYDRAULICS | |
| 25,000 TO 27,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| FO-992304 5” BORE X 60 STROKE |
AM-50001500AA | ARLINGTON AUTOMATICS |
| AM-50001500THI | TEXAS HYDRAULICS | |
Two Post Lift
| CBT-70, 90, CFF-70, 70PL, 70S, CFF-90, 90PL, CFF-10000 |
||
| CYLINDER | SEALS | NOTES |
| MA-C-681-46 | MA-K34159 | |
| CL-9000, CLT-8000 | ||
| CYLINDER | SEALS | NOTES |
| MA-C-744-08 | MA-K34345 | |
| CFF-70N, CFF-90A | ||
| CYLINDER | SEALS | NOTES |
| MA-R18230-87 | MA-K34159 | |
Two Post Lift
| SPL8000 & NPL 8000 | ||
| CYLINDER | SEALS | NOTES |
| MASTER SIDE NU-80.003 |
NU-20.036SK | |
| SLAVE SIDE NU-80.004 |
NU-20.037SK | |
| STL7000 | ||
| CYLINDER | SEALS | NOTES |
| 15.706 | CALL | CHAIN STYLE |
| NU-20.036 | NU-20.036SK | MASTER SIDE – CABLE STYLE |
| NU-20.037 | NU-20.037SK | SLAVE SIDE – CABLE STYLE |
| HEL7000 | ||
| CYLINDER | SEALS | NOTES |
| MASTER SIDE NU-10.064 |
CALL | |
| SLAVE SIDE NU-10.065 |
CALL | |
| HDL12000 | ||
| CYLINDER | SEALS | NOTES |
| NU-25.032 | NU-25.032SK | |
| UNI LIFT SERIES 3100, 3100T, 3300 | ||
| CYLINDER | SEALS | NOTES |
| MASTER SIDE NU-40.220 |
NU-40.220SK | |
| SLAVE SIDE NU-40.221 |
NU-40.221SK | |
| 3300 WHEEL-FREE LIFT | ||
| CYLINDER | SEALS | NOTES |
| MASTER SIDE NU-45.307 |
CALL | |
| SLAVE SIDE NU-45-308 |
CALL | |
Two Post Lift
| SP70, SP74 | ||
| CYLINDER | SEALS | NOTES |
| RO-FJ76 | RO-FJ76-12 | UNIVERSAL KIT 75 |
| AR94, ARO94, SP55, SP94, | ||
| SPOA84, SPO84, SPO94 | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL FJ783 REPLACEMENT RO-FJ7375 – OR – ORIGINAL FJ7211 REPLACEMENT RO-FJ7211 |
RO-FJ783-12TH | TEXAS HYDRAULICS |
| RO-FJ783-12MF | MF – PACOMA | |
| RO-FJ783-12TH | TEXAS HYDRAULICS | |
| RO-FJ783-12MF | MF – PACOMA | |
| SP80 Series 1-3, SP84 Series 1-7 | ||
| CYLINDER | SEALS | NOTES |
| RO-FJ720 | RO-FJ720-12 | BEST |
| RO-FJ720-30 | BEST OR TEXAS HYDRAULICS | |
| SP80 Series 4 & 5, SP84 Series 8 thru 11 | ||||
| CYLINDER | SEALS | NOTES | ||
| ORIGINAL FJ783 REPLACEMENT RO-FJ7375 – OR – ORIGINAL FJ7211 REPLACEMENT RO-FJ7211 |
RO-FJ783-12TH | TEXAS HYDRAULICS | ||
| RO-FJ783-12MF | MF – PACOMA | |||
| RO-FJ783-12TH | TEXAS HYDRAULICS | |||
| RO-FJ783-12MF | MF – PACOMA | |||
| AR98, ARO98, DCOA7, SP88, SP98, SPO82, | |||||
| SPO88, SPO98, SPOA82, SPOA88, SPOA98 | |||||
| CYLINDER | SEALS | NOTES | |||
| RO FJ7311 | RO-FJ783-12TH | TEXAS HYDRAULICS | |||
| RO-FJ783-12MF | MF – PACOMA | ||||
| AR9, AR09, SL9, SL28, SP7, SP9, SPO7, SPO9, | |||||
| SPO10 (200 Series), SPOA7, SPOA9, TL07 | |||||
| CYLINDER | SEALS | NOTES | |||
| RO-FJ7664 | RO-FJ783-12TH | TEXAS HYDRAULICS | |||
| RO-FJ783-12MF | MF – PACOMA1 | ||||
| S15IP, S18IP, SL19, SPO12 (LC, Hummer, | |||||
| Sprinter), SPO15, & 15LC, SPO18 |
|||||
| CYLINDER | SEALS | NOTES | |||
| RO-FJ7604 | RO-FJ7604-12HP | MF – PACOMA | |||
| RO-FJ7604-12TH | TEXAS HYDRAULIC | ||||
| AN10I, AN10N, S10I13, SPO10 (500/700), SPOA10 | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL N342 (68” STROKE) REPLACEMENT RO-N380 – OR – ORIGINAL N343 (71” STROKE) REPLACEMENT RO-N382 |
RO-N342-12 | MF – PACOMA |
| RO-N342-13 | PANNI | |
| RO-N342-12 | MF – PACOMA | |
| RO-N342-13 | PANNI | |
| SPO12 | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL N344 (68” STROKE) REPLACEMENT RO-N346 – OR – ORIGINAL N345 (71” STROKE) REPLACEMENT RO-N347 |
RO-N342-12 | MF – PACOMA |
| RO-N342-13 | PANNI | |
| RO-N342-12 | MF – PACOMA | |
| RO-N342-13 | PANNI | |
| A71-HA, A7PIP, S12I (13, P, HMR, SPRINTER), TI-O7 | ||
| CYLINDER | SEALS | NOTES |
| RO-N344 68” STROKE – OR- RO-N382 71” STROKE |
RO-N342-12 | MF – PACOMA |
| RO-N342-13 | PANNI | |
| RO-N342-12 | MF – PACOMA | |
| RO-N342-13 | PANNI | |
Four Post Lift
| FLS12, FLS15 | ||
| CYLINDER | SEALS | NOTES |
| RO-FC5155 | RO-FC5155-10TH | UNIVERSAL |
| FLS25, SM250, SM270, SM271, SM272 | ||
| CYLINDER | SEALS | NOTES |
| RO-FC5225-15 | RO-FC5225-70 | UNIVERSAL SEAL KIT |
| AR122, ARO122, QL4P, QLHV, SM122, SM122EL, SM122S |
| ORIGINAL FC5797 REPLACEMENT RO-FC5795-1
– OR – ORIGINAL FC5342 (CLEVIS) REPLACEMENT RO-FC5797-1 |
| CYLINDER | SEALS | NOTES |
| RO-FC5795-TH | UNIV. SEAL KIT FOR FC597 CYL. | |
| RO-FC542-12TH | SEALS FOR ORIG. FC5342 CYL. | |
| RO-FC542-12MF | SEALS FOR ORIG. FC5342 CYL. | |
| RO-FC5767-TH | UNIV. SEAL KIT FOR FC5797 CYL. |
| AR90, AR91, SM90, SM91, CWA90 |
| ORIGINAL FC5343 (CLEVIS) REPLACEMENT RO-FC5343
– OR – ORIGINAL FC537 (BRACKET) REPLACEMENT RO-FC537-KIT |
| CYLINDER | SEALS | NOTES |
| RO-FC537-12TH | TEXAS HYDRAULICS | |
| ROFC-537-12MF | MF-PACOMA | |
| RO-FC537-12TH | TEXAS HYDRAULICS | |
| RO-FC537-12MF | MF-PACOMA |
| AR120, AR121, QL4P, QLHV, | ||
| SM101, SM120, SM121, SWA120 | ||
| CYLINDER | SEALS | NOTES |
| ORIGINAL FC5342 REPLACEMENT RO-FC5797-1 (CLEVIS) -OR- ORIGINAL FC542 (BRACKET) REPLACEMENT RO-FC542KIT |
RO-FC542-12TH | SEALS FOR FC5342, TEXAS HYDRAULIC CLYINDER |
| RO-FC542-12M | SEALS FOR FC5342, MF-PACOMA CLYINDER | |
| RO-FC5797-TH | SEALS FOR FC5797 CYLINDER | |
| RO-FC542-12TH | SEALS FOR FC542, TEXAS HYDRAULIC CLYINDER | |
| RO-FC542-12MF | SEALS FOR FC542, MF-PACOMA CLYINDER | |
| SM600 | SM300 thru 302, SM500 thru 504, |
|
| thru 604, SMA300 thru 302 | ||
| CYLINDER | SEALS | NOTES |
| RO-FC5761 | RO-5761-12TH | TEXAS HYDRAULICS |
| RO-15474 | TEXAS HYDRAULICS | |
| AR43, SM18, SM80, SM180, SM181 | ||
| CYLINDER | SEALS | NOTES |
| RO-FC5810-38 | RO-FC5810-38-12TH | TEXAS HYDRAULICS |
| AR12, AR123, AR40, AR55, ARO12, ARO123 | ||
| CYLINDER | SEALS | NOTES |
| RO-S130002 | RP-S130002-12HY | HYCO |
| SM121, | SM123, SM40, SM54, SM55, | |
| SM88, SMO121, SMO123 | ||
| CYLINDER | SEALS | NOTES |
| RO-S130002 | RP-S130002-12HY | HYCO |
Two Post Lift
| 7,000 TO 9,000 LBS CAPACITY (CHAIN OVER) | ||
| CYLINDER | SEALS | NOTES |
| WE-S100 2.5” BORE |
WE-S210 | UNIVERSAL KIT |
| WLO- 12,000 LBS CAPACITY (CHAIN OVER) | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001 3” BORE |
AM-30001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-30001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-30001500CAN | READY MACHINE 1.50” SHAFT | |
| AM-30001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-30001500THI | TEXAS HYDRAULIC | |
| AM-30001750KER | IMPORT | |
| WLO- 15,000 LBS CAPACITY (CHAIN OVER) | ||
| CYLINDER | SEALS | NOTES |
| 3.5” BORE | AM-35001750CAN | READY MACHINE 1.75” SHAFT |
| WSO90A / Y2K (2 POST) | ||
| CYLINDER | SEALS | NOTES |
| CALL | WE-S1021 | |
| TIRE LIFT | ||
| CYLINDER | SEALS | NOTES |
| WE-S110 | WE-S200 | UNIVERSAL |
| WRT-12 12,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| AM-35001500AA ARLINGTON AUTOMATICSEA- |
S/N ENDS IN “AA” | |
| 021-003 | AM-35001500THI | TEXAS HYDRAULICS |
| 3.5” BORE X 72” STROKE |
AM-35001500CAN | ARLINGTON READY MACHINE |
| AM-35001500KER | IMPORT SQUARE | |
| WRT-18 18,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| EA-021-003
4” BORE X 72” |
AM-40001500CAN | READY MACHINE |
| WFP-24 | ||
| CYLINDER | SEALS | NOTES |
| EA-021-008 | AM-50001500CAN | BLACK CYLINDER |
| AM-50001500AA | BLUE CYLINDER | |
| WRT-24, WRT-25, WRT-30 | ||
| CYLINDER | SEALS | NOTES |
| EA-021-004 | GE-55001750KER | IMPORT |
| 5.5” BORE X 60” STROKE |
GE-55001750CAN | READY MACHINE |
| – OR – | AM-50001500AA | ARLINGTON AUTOMATICS |
| EA-021-008 | AM-50001500CAN READY MACHINE5” |
|
| BORE X 60” STROKE | AM-50001500THI | TEXAS HYDRAULIC |
| AM-50001500DK | DAKOTA | |
Two Post Lift
| 7144V, 8144V, 9144V, 11144VS | |||
| CYLINDER | PISTON | GLAND | NOTES |
| 3-0735 | 0-0159 | 0-0551 | RIGHT SIDE |
| 4-0289 | 0-0160 | 0-0206 | LEFT SIDE |
| 7144, 11168, 11168VS | |||
| CYLINDER | PISTON | GLAND | NOTES |
| 3-0480 | 0-0159 | 0-0207 | RIGHT SIDE |
| 4-0289 | 0-0160 | 0-0206 | LEFT SIDE |
| 7144, 8144 VECTOR | |||
| CYLINDER | PISTON | GLAND | NOTES |
| 3-0430 | 0-0159 | 0-0162 | RIGHT SIDE |
| 4-0289 | 0-0160 | 0-0206 | LEFT SIDE |
| DIRECT | 1776 SERIES, 1800 Series, 1969 Series |
||
| PULL, CABLE EQ. 9K-10K LBS | |||
| CYLINDER | PISTON | GLAND | NOTES |
| 3-0621 | 0-0337 | 0-0338 | |
| 7010, 7012 | |||
| CYLINDER | PISTON | GLAND | NOTES |
| 3-0376 | 0-0159 | 0-0162 | RIGHT SIDE |
| 4-0227 | 0-0160 | 0-0182 | LEFT SIDE |
| 8020 Series, 8021 | |||||
| CYLINDER | PISTON | GLAND | NOTES | ||
| 4-0171 | 0-0159 | 0-0162 | RIGHT SIDE | ||
| 4-0173 | 0-0160 | 0-0161 | LEFT SIDE | ||
| 2012 Series | |||||
| CYLINDER | PISTON | GLAND | NOTES | ||
| 3-0883 | 0-0159 | 0-0551 | |||
Four Post Lift
| 10000 Series, 12000 Series | |||||
| CYLINDER | PISTON | GLAND | NOTES | ||
| 0-1654 | 0-0169 | 0-0170 | Serial #Q | ||
| 0-1655 | 0-0169 | 0-0170 | Serial #EQ | ||
| 14000 Series | |||||
| CYLINDER | PISTON | GLAND | NOTES | ||
| 4-0393 | 0-0241 | 0-0242 | 3.5” CYLINDER | ||
| 18000 Series | |||||
| CYLINDER | PISTON | GLAND | NOTES | ||
| 3-0681 | 4“ CYLINDER | ||||
Two Post Lift
| 7,000 TO 9,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-000 2.5” BORE X 36” STROKE |
AM-25001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-25001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-25001500CAN | READY MACHINE 1.50” SHAFT | |
| AM-25001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-25001500THI | TEXAS HYDRAULICS | |
| AM-25001500KER | IMPORT | |
| 10,000 TO 15,000 LBS CAPACITY | ||
| CYLINDER | SEALS | NOTES |
| EA-021-001
3” BORE X 36” |
AM-30001500AA | ARLINGTON AUTO 1.50” SHAFT |
| AM-30001750AA | ARLINGTON AUTO 1.75” SHAFT | |
| AM-30001500CAN | READY MACHINE 1.50” SHAFT | |
| AM-30001750CAN | READY MACHINE 1.75” SHAFT | |
| AM-30001500THI | TEXAS HYDRAULIC | |
| AM-30001750KER | IMPORT | |
Four Post Lift
| 12,000 TO 15,000 LBS CAPACITY – CHAIN STYLE | ||
| CYLINDER | SEALS | NOTES |
| AM-35001500AA | ARLINGTON AUTOMATICS | |
| EA-021-003 | AM-35001500THI | TEXAS HYDRAULICS |
| 3.5” BORE X 72” STROKE |
AM-35001500CAN | READY MACHINE |
| AM-35001500KER | IMPORT | |
| 25,000 TO 30,000 LBS CAPACITY – CHAIN STYLE |
| CYLINDER | SEALS | NOTES |
| EA-021-004 | GE-55001750CAN | READY MACHINE |
| GE-55001750KER | IMPORT | |
| 5.5” BORE X 60” STROKE – OR – |
AM-50001500AA | ARLINGTON AUTOMATICS |
| EA-021-008 | AM-50001500THI | TEXAS HYDRAULICS |
| 5” BORE X 60 STROKE |
AM-50001500CAN | READY MACHINE |